Assembly Security Test A flush receptacle having a 5-15R,5-20R,6-15R,or 6-20R configuration is to be mounted in the fixture described in Figure 118.1, and 50 lbf (220 N) is to be applied, as shown in Figure 118.2, for a period of 10 s by means of a push-out tool inserted into the slots of the receptacle. The push-out tool required for configuration 5-15R is to be as shown in Figure 118.3. The tool...
Assembly Security Test A flush receptacle having a 5-15R,5-20R,6-15R, or 6-20R configuration is to be mounted in the fixture described in Figure 124.1, and 50 lbf (220 N) is to be applied, as shown in Figure 124.2, for a period of 10 s by means of a push-out tool inserted into the slots of the receptacle. The push-out tool required for configuration 5-15R is to be as shown in Figure 124.3. The too...
Probe Test A tamper-resistant receptacle shall not permit contact to be made between the probes shown in Figure 139.1 and Figure 139.2 and any live part of the receptacle through the outlet slots when tested as described in this section. UL498 Figure 139.1 Twelve previously untested devices are to be used for this test. The probe shown in Figure 139.1 is to be applied to each of the outlet slot op...
Assembly Security Test A flush receptacle having a 5-15R,5-20R,6-15R, or 6-20R configuration is to be mounted in the test fixture described in Figure 124.1, and 50 lbf (220 N) is to be applied, as shown in Figure 124.2, for a period of 10 s by means of a push-out tool inserted into the slots of the receptacle. The push-out tool required for configuration 5-15R is to be as shown in Figure 124.3. Re...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語