The BIS IS 16103 (Part 1): 2012 standard, issued by the Bureau of Indian Standards (BIS), covers the specifications for LED modules for general lighting purposes. Here are the key contents of the standard:
Scope and Application
• This standard applies to LED modules intended for general lighting applications.
• It covers performance requirements and test methods, focusing on ensuring quality and safety in general lighting uses.
Terms and Definitions
• Defines key terms such as LED module, luminaire, rated life, luminous flux, and other technical parameters to ensure consistent understanding and application.
Classification
• LED modules are classified based on their electrical characteristics, structural features, and intended applications.
Requirements
General Requirements
• LED modules must be designed and manufactured to meet safety, environmental, and performance standards.
Electrical Requirements
• Specifies requirements for rated voltage, power factor, power consumption, and operating current.
• Includes parameters like starting time, warm-up time, and compatibility with control gear.
Photometric Requirements
• Specifies requirements for luminous flux, color rendering index (CRI), correlated color temperature (CCT), and other photometric parameters.
• Light output should be stable, with lumen depreciation within acceptable limits over time.
Mechanical Requirements
• Ensures LED modules meet specified standards for mechanical strength, impact resistance, and vibration resistance.
Environmental Requirements
• Specifies performance standards under various environmental conditions such as temperature, humidity, and thermal management.
Test Methods
• Provides detailed methods for testing various performance parameters to ensure the accuracy and repeatability of test results.
• Includes methods for testing luminous flux, CRI, CCT, power factor, power consumption, and thermal performance.
Appendices
• Appendices offer additional explanations, calculation methods, and examples to aid in the understanding and implementation of the standard’s requirements.
The BIS IS 16103 (Part 1): 2012 standard aims to ensure the safety, reliability, and performance stability of LED modules for general lighting applications. It provides a unified technical specification to promote consistency and interchangeability of LED module products in the market.
LISUN supplies the fully test solutions for the following BIS IS 16103 (Part 1): 2012 , please see the below excel table:
BS IS 16103 Clause and Subject | LISUN Model |
4.2 All electrical measurement for LED modules | TRS-1000 or T5 |
5.2 The standard test temperature is 25℃ | IS-*MT |
9. Provisions for Protective earthing | WB2678A |
11. Moisture Resistance and Insulation | LS9923 or WB2681A and GDJS-015B |
12. Electric Strength | WB2671B |
17. Screw, Current-Carrying Parts and Connections | CH338 |
18.1 Ball Pressure at high temperature chamber | ZBP-T and GW-225 |
18.2 The combustibility and ignition hazard of the specimen are assessed based on factors such as ignition | HVR-LS |
18.3 Glow wire test | ZRS-3H |
18.4 Needle Flame test | ZY-3 |
18.5 Tracking Test | TTC-1 |
19. Resistance of Corrsion | YWX/Q-010 |
Annex C Luminous Flux | LPCE-2(LMS-9000) and LSG-1200A |
Your email address will not be published. Required fields are marked *
[wpforms id="9600"]