AS/NZS 3112:2017 Amd 1:2021 Approval and test specification – Plugs and socket-outlets

Instruction/New text
Faceplates that are assembled without the use of screws or rivets and are to be removed (with or without the use of a tool) for adjustment of control settings as stated in manufacturer’s instructions; or to be removed for mounting of the socket-outlet, and that do not have visible indications of cover securing screws, the faceplate shall be removed and reinstalled 10 times prior to the tests of Clauses 3.14.12.2 to 3.14.12.6.

LISUN following instruments fully meet AS/NZS 3112:2017 Amd 1:2021 Approval and test specification – Plugs and socket-outlets:

AS/NZS 3112 of Australia and New Zealand Standard Plugs and Socket-Outlets Gauges

GNGPL-31C1 Three-Pin Test Plug for Checking Three-Pin Flat-Pin 250 V Max. Socket-Outlets Against The Standard Test Finger with AS/NZS 3112 Figure C1

Leave a Message

Your email address will not be published. Required fields are marked *

[wpforms id="9600"]

AS/NZS 3112:2017 Amd 1:2021 Approval and test specification – Plugs and socket-outlets

GNGPL-ASNZS AS/NZS 3112 of Australia and New Zealand Standard Plugs and Socket-Outlets Gauges

GNGPL-3136 Device for Checking The Resistance to Lateral Strain (Three-Pin Gauge) with AS/NZS 3112 Figure 3.6

GNGPL-3137 Device for Checking The Resistance to Lateral Strain (Two-Pin Gauge) of AS/NZS 3112 Figure 3.7

GNGPL-31A1 AS/NZS 3112 Figure A1 Gauge for Three-Pin 250 V Max Flat-Pin Plugs

GNGPL-3131 Gauge for Depth of No-Contact Test of AS/NZS 3112 Figure 3.1

GNGPL-31F1 Gauge for Flat and Round Pin Plugs of AS/NZS 3112 Figure F1

GNGPL-31B1 Gauge for Two-Pin Flat-Pin 125 V Max. Plugs (With Parallel Pins) of AS/NZS 3112 Figure B1

GNGPL-31C1 Three-Pin Test Plug for Checking Three-Pin Flat-Pin 250 V Max. Socket-Outlets Against The Standard Test Finger with AS/NZS 3112 Figure C1

Leave a Message

Standards

EN 13032-1: 2004 Light and Lighting – Measurement and Presentation of Photometric Data of Lamps and Luminaires – Part 1: Measurement and File Format

IS 15885 (Part 2/Sec 13): 2012 Safety Of Lamp Controlgear Part 1 Particular Requirements-Section 13 d.c. or a.c. Supplied Electronic Controlgear for LED Modules

IEC 60335-2-40: 2022 Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

IS 15885 (Part 1): 2011 Safety Of Lamp Controlgear Part 1 General Requirements

IS 16107-2-1: 2012 Luminaires Performance-Part 2 Particular Requirements-Section 1 LED Luminaire

Related Products

AS/NZS 3112 of Australia and New Zealand Standard Plugs and Socket-Outlets Gauges

Gauge for Depth of No-Contact Test of AS/NZS 3112 Figure 3.1

Device for Checking The Resistance to Lateral Strain (Three-Pin Gauge) with AS/NZS 3112 Figure 3.6

Device for Checking The Resistance to Lateral Strain (Two-Pin Gauge) of AS/NZS 3112 Figure 3.7

AS/NZS 3112 Figure A1 Gauge for Three-Pin 250 V Max Flat-Pin Plugs

Gauge for Two-Pin Flat-Pin 125 V Max. Plugs (With Parallel Pins) of AS/NZS 3112 Figure B1

Three-Pin Test Plug for Checking Three-Pin Flat-Pin 250 V Max. Socket-Outlets Against The Standard Test Finger with AS/NZS 3112 Figure C1

Gauge for Flat and Round Pin Plugs of AS/NZS 3112 Figure F1