IEC 60884-1 Clause 13.14 Figure 16 Device for Checking the Resistance to Lateral Strain | IEC 60884-1 Clause 20 Figure 18 and 19 Maximum and Minimum Pull-out Force

The BCL-1 fully complies with IEC 60884-1 Clause 13.14, Figure 16(GB/T 2099.1); IEC 60884-1 Clause 22.2, Figure 25; and Clause 22.2.2, Figure 26 (GB/T 2099.1). It is used to check the maximum force required to pull a plug out of a socket, the minimum force required to pull a single-pole pin out of a socket, and to assess whether the socket can withstand the lateral stress applied by appliances inserted into the socket. This device is suitable for plugs and sockets with a rated voltage not exceeding 250V and a rated current less than 16A.

Figure 16 Devices for checking the resistance to laterral strain

Figure 25 Apparatus for verification of maximum withdrawal force

Figure 26 Apparatus for verification of maximum withdrawal force

Specifications:
• Weights: One 36N weight, one 5.4N weight, two 5N weights, one 4N weight, one 2.6N weight
• Standard test plugs: One 2-pole 10A, one 3-pole 10A, and one 3-pole 16A
• Standard test pins: One 1.5N, one 2N
• Clamping device: 1 piece
• Weight tray: 1 piece
• Lateral stress weight (5N): 1 piece
• Lateral stress bar: 1 piece