IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements

Scope

IEC 60335-1:2020 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances.

Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.

IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements Standard Download

LISUN supplies the fully test solutions for the following IEC 60335-1:2020, please see the below excel table

IEC 60335-1:2020 Clause and Subject	LISUN Model
Clause 8.1.1IEC 61032 Standard Articulated Test Probe with 10N Thrust	SMT-02T10
Clause 8.1.2 Test Probe 13 with Cable with standard EN 61032	SMT-1213C
Clause 8.1.3 Test Probe 41 of IEC 61032 – Test Cone for Access Probes to Hazardous Hot or Glowing Parts	SMT-1241
Clause 11 Heating	TMPWS-010
Clause 12 Figure1/2/3/4 Leakage current and electric strength at operating temperature	MNTC-G2G3
Clause 14 Transient overvoltages Table6	SUG335
Clause 15.1.1 IP Waterproof test	JL-12/ JL-34/ JL-56 /JL-7
Clause 16.2 Leakage current	WB2675D
Clause 16.3 electric strength	WB2671B
Clause 19.11.4.1 ESD Simulator Guns	ESD61000-2
Clause 19.11.4.3 EFT Immunity Measurement	EFT61000-4
Clause 19.11.4.4 Surge test	SG61000-5
Clause 19.11.4.5 RF Conducted Immunity Test System	RFCI61000-6-85W & AB-100W
Clause 19.11.4.6 Voltage Dips and Interruptions Generator	CSS61000-11
Clause 19.11.4.7 Programmable AC/DC Testing Power Supply System	LSP-EMC500VA
Clause 20.1 Stability	WDT-2
Clause 21.1 Mechanical strength	IK04
Clause 21.2 Figure7 Test Finger Nail for IEC 60335-1 Figure 7	SMT-335F7
Clause 21.11 IEC 61032 Unjointed Test Finger Test Probe 11	SMT-1211C
Clause 21.18 Resistant to corrosion	YWX/Q-010
Clause 22.5 Peak Power Cutoff Device	LS-RVT-2000W
Clause 23.3 and 25.14 Figure 8 Flexing test apparatus,	SW-6
Clause 29.2 Annex N Proof tracking test apparatus	TTC-1
Clause 29.3.3 High temperature test	GW-225
Clause 30.1 Annex O Figure O.1 Ball pressure test	ZBP-T
Clause 30.2.1/2/3 Annex O Figure O.2 Glow wire test	ZRS-3H
Clause 30.2.4 Annex E Needle flame test	ZY-3
Clause 31 Salt Spray test	YWX/Q-010
Annex B Automatic Double-Arms Drop Test Machine	DT-60KG
Annex H 3 Position Plug Socket Switch Life Tester	CZKS-3 & DFX-40
Annex L Creepage Distance Ruler	CK-1