LISUN SY2036 LED Aging and Life Test Rack – After-sales Frequently Asked Questions (FAQ)

SY2036 LED aging and life test rack is fully designed according to the IEC standards, and it can also be designed based on the customer request. SY2036 can test all kinds of lamps and luminaires, such as LED, CFL, HID Indoor lamp and Outdoor lamp.

Features:
• PLC program and English/Chinese touch screen, easy for the operation and maintenance.
• Built in over-current protection system. When the load’s current becomes too high, the device will give alarm and switch off the output to protect the transformer.
• Contains 3 independent floors and can work separately, it can test different kinds of EUT.

SY2036 Aging and Life Test Rack

Specification:
• Input Power supply: AC220V, 50/60HZ, 12KVA Min (110V is optional)
• Built-in transformer: 0-250V 5KVA and 0-300V 5KVA (Other power is optional)
• Maximum power for EUT: 5KVA and 12A (Other power is optional)
• EUT and Number: 112pcs B22, 112pcs E27. 36pcs T5/T8/T12 Tube. 22pcs LED panel (Other EUT can be designed according to customer request)
• ON/OFF test: Can be set on the touch screen with program
• Test cycles: 0~99999（Adjustable）

Q1: How to distinguish single-head and double-head lamps?
A1: Single-head lamps are powered at one end, and the lamp power line is connected from the two terminals at either end of ① or ②; double-head lamps are powered at two ends, and the lamp power line is connected from one terminal at each end of ① and ②.
Then install the lamp correctly according to the user manual.

LED tube lamp

Q2: Why are there two transformers?
A2:There are standards that require high and low voltages to be used alternately to power the sample for aging tests. To meet the standard requirements, two transformers can adjust different output voltages for the aging lamps alternately. Of course, if a constant voltage is required throughout the aging test, only one transformer is needed. How to use one or two transformers, please set according to the user manual.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997