The difference between HBM/MM ESD Simulator for IC testing and IEC61000-4-2 electrostatic discharge generator

1. Differences in application areas
ESD61000-2 Electrostatic discharge generator is fully compliant with IEC/EN 61000-4-2, GB/T 17626.2 standards and belongs to the category of electromagnetic compatibility. The test object is a device that can work independently, such as LED lamps, and the device is in normal working condition.

ESD61000-2_Electrostatic Discharge Simulator

ESD-883D HBM/MM ESD Simulators fully complies with GJB548A-96 method 3015, national military standard GJB128A-97 method 1020, MIL-STD-883D, EIAJED-4701, ANSI/ESD STM5.1, ANSI/ESD STM5.2, EIA /JESD22-A114-B, EIA/JESD22-A115-A, applied to the ESD tolerance test of semiconductor components, the test object is semiconductor components such as IC, etc., to test their ability to withstand ESD during storage, transportation, and assembly.

ESD-883D Electrostatic Discharge (ESD) IC Tester

2. Differences in generator principle

A simplified diagram of the ESD61000-2 ESD generator

A simplified diagram of the ESD-883D HBM/MM ESD Simulators

3. The difference of the discharge waveform

ESD61000-2 Electrostatic Discharge Generator Discharge Current Waveform

ESD-883D HBM/MM ESD Simulators Current Waveform

4. Differences in test methods

Common test methods of ESD61000-2 electrostatic discharge generator

Common test methods of ESD-883D HBM/MM ESD Simulators

For HBM testing without a discharge gun, use a pair of clips or probes to directly connect the chip pins. The picture shows the situation of testing DIP packaged chips.

5. CNAS measurement calibration difference of China Metrology Institute

ESD61000-2 Electrostatic Discharge Generator Calibration Method

ESD-883D HBM/MM ESD Simulators calibration Method

ESD-883D uses a high-frequency current transformer to directly measure the output short-circuit current waveform. Measurement specification: JJF 1238-2010 Integrated Circuit electrostatic discharge sensitivity test equipment calibration specification.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618917996096