IEC 60884-1 Clause 24.7 | IEC 60598-1 Clause 4.12.5 Threaded Sealing Cover Test Device

LWMF-1 Threaded Sealing Cover Test Device fully meet IEC 60884 Clause 24.7 (GB/T 2099.1 Clause 24.7), IEC 60598-1 Clause 4.12.5 (GB 7000.1 Clause 4.12.5), IEC 61058-1 Clause 19.2.5 (GB/T 15092.1 Clause 19.2.5)and IEC 60669-1 Clause 20.3 (GB/T 16915.1 Clause 20.3) are designed and manufactured. It is used to test the installation reliability of the threading cover of the electrical product. The Threaded Sealing Cover uses a fixed pulley mode to apply a torque to give a metal rod through the φ500mm outer circle, which improves the trouble of traditional torque through the wrench. The metal sealing cover can be measured, and the molded plastic sealing cover can also be determined.

Specifications

• Dise diameter: 500mm
• Sample loading clamps: two sides of the mount, fixed on the disc, holding the other end to be adjusted
• Metal stick specifications: ф5, ф7, ф9, ф10, ф12, ф14, ф16, ф18, ф20, ф22, ф25, ф30mm
• Test 1.5-30N.m torque is implemented with weight: 2.5Nm, 3.75Nm, 4nm, 5.0 Nm, 6.25Nm, 7.5 Nm, 10.0 Nm, 10.0 Nm, 10.0 Nm

IEC 60884 Clause 24.7