IEC 60884-1 Clause 24.10 Figure 32 Multi-Movable socket – Outlets Mechanical Strength Testing Device

LS-B11 Multi-Movable socket – Outlets Mechanical Strength Testing Device is fully complied with IEC 60884-1 Clause 24.10 Figure 32 (GB/T 2099.1 chapters 24.10 and Figure 29 ) standard. It is used to check the mechanical strength of the lightest soft cable after the multi -bit moveable socket that can be disassembled. Test methods and principles: Fix the free end of the soft cable to the fixed end, and the height of the fixed point to the ground is 750mm, grab the sample, so that the soft cable is in a horizontal state, and then the samples fall to the concrete floor 8 times. After each fall, the soft cable is turned 45 ° at the fixed point. After the test, the sample should not be damaged in the standard sense, especially the parts must not loosen or fall off.

Specification:
• Falling height: 750mm
• Distance from fixed end: 2250mm
• The number of drops: 8 times
• Rotating device: 45 ° points, eight directions can rotate
• Falling method: manually release
• Dimensions: 2300*500*860mm(L*W*H)

IEC 60884-1 Clause 24.10 Figure 32