IEC60227-2 | IEC60245-2 Cable/Wire Static Flexibility Test Machine

The Cable/Wire Static Flexibility Test Machine is suitable for testing the soft cables with rubber insulation and sheath under dynamic bending test with load, and automatically stops when wire and cable faults are detected during the test. Fully meet 3.1.1 of IEC60227-2 (5.6.3.1 of IEC60227-1 and 3.1.1 of IEC60245-2 3.1 (5.6.3.1 of IEC60245-1) Flexing test for flexible cables. It is also fully meet UL1581, VDE0472, HD22.1 5.6.3.1 and 5.6.3.2 standards.

Standard:
IEC60227-2 “Polyvinyl chloride insulated cables of rated voltage up to and including 450/750V – Part 2 Test methods”
IEC60245-2 “Rubber insulated cables – Rated voltages up to and including 450/750 V – Part 2: Test methods; Amendment 1”
VDE0472 “Testing of cables, wires and flexible cordsLow-temperature brittleness”
HD22.1 “Cables of rated voltages up to and including 450/750 V and having cross-linked insulation – Part 10: EPR insulated and polyurethane sheathed flexible cables”

5.6.3.1 Flexing test for flexible cables

Figure 1 Flexing apparatus

Specification:
• Flexural length: 200 -1500(mm)
• Sample outer diameter: φ6 – 32(mm)
• Sample length: 3000±5% (mm)
• Height above ground: 1500mm
• Overall dimensions (length*width*height): 2000*400*1800mm