UL 1017 STANDARD FOR SAFETY Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines

These requirements do not cover appliances rated more than 250 V. An appliance that utilizes some other source of energy, such as gas or steam, in addition to electric energy is to be investigated under these requirements and under such additional requirements as are applicable to the appliance under consideration.

These requirements do not cover appliances for use in locations such as those areas of hospitals, laboratories, institutions, and the like where dispersion of pathological, chemical, physical, radioactive or other agents could produce a risk to health. Appliances intended for use in such locations are investigated under these requirements and under such additional requirements as are applicable to the appliance, with appropriate consideration being given to the specific intended use.

These requirements apply only to a specific type or types of appliances, such as a vacuum cleaner or floor finishing machine, if the requirement is so identified by specific reference to the type or types involved. Absence of such specific reference or use of the term “appliance” indicates that the requirement applies to all appliances covered by this standard.

Intemal-combustion engine powered floor cleaning machines for indutrial/commercial use, such as floor buffers, scrubbers, sweepers, extractors, and polishers, are covered under UL 558.

These requirements do not cover machines that generate pressure in excess of 2.5 MPa (360 psi).

LISUN following instruments fully meet UL 1017 STANDARD FOR SAFETY Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines

SMT-SA1788A International Electrotechnical Commission with UL 1017 Figure 4

SMT-PA140C Straight Probe of UL 1017 Figure 3

SMT-SU0252 UL 1017 Figure 25 Accessibility Probe