UV Aging Test Chamber: Test standards for UV Aging Test Chamber

UV aging test chamber is a device used to simulate UV light irradiation conditions and evaluate the weatherability and durability of materials. In various industries, UV aging test chambers are widely used in materials research and product quality control to ensure that products can maintain good performance and appearance during long-term use.

The design principle of UV aging test chamber is based on the UV radiation of sunlight. The equipment is equipped with special UV light sources that emit UV rays similar to sunlight. By adjusting the intensity and operating parameters of the UV light source, different UV light irradiation conditions in different regions and seasons can be simulated.

The application range of UV aging test chamber is very wide, covering many different types of materials and products. Here are some common application areas:
1. Plastics and rubber industry: Plastics and rubber products are inevitably exposed to UV radiation in outdoor environments. UV aging test chambers are used to test the weatherability and durability of materials to determine whether their lifespan and performance meet requirements in outdoor use.

2. Coatings industry: Coatings also need to withstand UV radiation, especially exterior wall coatings and automotive paints. By exposing coating samples in UV aging test chambers, the color stability, weatherability, and chemical stability can be evaluated.
3. Textile and leather industry: Textileproducts and leather products are prone to fading and deterioration when exposed to sunlight and UV radiation. UV aging test chambers can simulate the effects of different UV radiation conditions to evaluate the durability and color fastness of textiles and leather.
4. Electronics industry: Many electronic products need to withstand UV radiation during use, such as outdoor displays and solar panels. Using UV aging test chambers can simulate the effects of long-term UV radiation on the performance and lifespan of electronic products.

The use of UV aging test chambers needs to follow certain standards and specifications. Here are some common UV aging test standards:
1. ASTM G154: This is a UV aging test standard developed by the American Society for Testing and Materials (ASTM). It covers the operation, parameter settings, and data analysis methods of UV aging test chambers.
2. ISO 4892-3: This is a standard for UV aging tests of plastic materials developed by the International Organization for Standardization (ISO). It specifies the methods of lifespan evaluation and test conditions for materials under UV radiation.
3. GB/T 16422.3: This is a UV aging test standard for plastic materials published by the Standardization Administration of China. It is similar to ISO 4892-3 but applicable for material testing in China.

Precautionsfor using UV aging test chambers:
UV aging test chambers are suitable for aging tests of non-metallic materials under sunlight and artificial light sources. To ensure safe use, please note the following:
1. After a long period of inactivity, carefully check the water source, power supply, and components before restarting the equipment.
2. Try to minimize the time of opening the chamber door during the test.
3. Do not subject the sensing devices inside the chamber to strong impacts.
4. Make sure there is sufficient water supply during the operation of the equipment.
5. Only trained operators should operate the UV aging test chamber.
6. In case of malfunctions that cannot be resolved by yourself, please contact our company.
7. UV radiation is harmful to personnel (especially the eyes). Therefore, operators should minimize exposure to UV light (contact time should be less than 1 minute). It is recommended for operators to wear protective goggles and protective sleeves.

The use of UV aging test chambers is not only important for researchers and manufacturers, but also has significant implications for consumers. By conducting UV aging tests, the accuracy and reliability of the test results can be ensured. Therefore, when conducting UV aging tests, it is important to follow relevant standards and specifications, and combine the test data with actualconditions to obtain more accurate and reliable evaluation results. The use of UV aging test chambers will contribute to the advancement of material science and product development, and improve the quality and performance of products.

UV aging test Chamber is designed for evaluating the resistant performance of non-metallic materials, organic materials (plastics, paints, coatings, rubbers, etc.) under the specified conditions such as sunlight, temperature, and other climatic conditions. It creates a man-made testing environment imitating the natural light source such as sunlight and other damages in the nature, such as rain and dew damage, to impose on the materials and to assess the degree of color changing and fading under the accelerated environment conditions. The chamber fully complies with the requirements of Standard ISO 4892-1, ISO 4892-3, GB/T16585-1996, GB14522-93, GB/T16422.3-1997, ASTMG53 and etc., provides the best UV sunlight simulation, and is easy to use and operate.

UV-263LS UV aging test Chamber

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997